7.0 POSITIONING OF FIELD REMOVABLE PARTS
Removal and refitting of
glass door assembly and
burner assembly.
Figure 11
Removal and refitting of the decora-
tive glass facia (see Section 16.0)
Figure 12
16
4 off burner
installation
positions
The glass panel is
supported by two
self-locking M6
screws, one on
each side
Damper
Fixing
hole
WARNING
Failure to position the parts in
accordance with these diagrams
or failure to use only parts specifi-
cally approved with this heater
may result in property damage
or personal injury.
Visual check for cor-
rect pilot flame.
Figure 13