Fujitsu ScanSnap N1800 Operator's Manual page 403

2. Press the [Scan] button on the [Message Screen].
The scanning starts.
Each page is briefly shown on the window as it is scanned.
When the scan has completed, the [Scan Viewer] opens.
For details about editing on the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
When [Off] is set, the [Scan Viewer] is not shown.
When a file name can be changed, the [File Name] window is shown before a
scan. For more details, refer to
Mail Attachment)" (page
When the setting of the [Scan Count] can be changed, the [Scan Count]
window is shown before a scan. For more details, refer to
the Number of Sheets to Be Scanned" (page
3. Check the scanned data.
For more details about the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
4. Press the [OK] button on the [Scan Viewer].
The data is processed according to the specified job.
While the job is being processed, the process is shown in real time on the [Job
Progress] window.
395).
"6.14.2 Changing a File Name (for Save/e-
407).
395).
403
"6.11 Editing the
"6.14.3 Checking
408).
"6.11 Editing the