5.
RE-PACKING INSTRUCTIONS
When re-packing the printer before shipping, be sure to follow the steps and
cautions below. Failure to do so will cause toner or oil spill in the printer and
severe damage to the printer.
1) Turn off the printer power switch,
and then unplug the printer.
Disconnect the interface cable from
the printer.
2) Open the front cover of the printer.
3) Pull out the all toner cartridges from
the printer.
4) Install the orange protective cover
to the each toner cartridge as
shown in the illustration.
PRECAUTION
A-9
Protective cover