Important Safety Instructions - Brother HL-L2400D Product Safety Manual

DO NOT run your hand over the edge of the paper. The thin and sharp edges of the paper
may cause an injury.
This machine contains electronic components that emit electromagnetic radiation during the
printing operation. To avoid the possibility of electromagnetic radiation exposure to your body,
maintain a distance of 7.87 inches (20 cm) from both sides of the machine when printing.
DO NOT remove or damage any of the caution or warning labels inside the product.
IMPORTANT
• A distinct change in the product's performance may indicate a need for service.
• DO NOT connect your product to an AC power outlet controlled by wall switches or
automatic timers, or to the same circuit as a large appliance or other equipment that
requires a significant amount of electricity. It could disrupt the power supply. Disruption of
the power supply may also delete information from the product's memory, and repeated
cycling of the power supply can damage the product.
• DO NOT put any objects on top of the product. Doing so may cause the product to
malfunction.

Important Safety Instructions

DO NOT attempt to service this product yourself because opening or removing covers may
expose you to dangerous voltage points and other risks and may void your warranty. Refer all
servicing to a Brother Authorized Service Center.
1. Read all of these instructions.
2. Save these instructions for later reference.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the AC power outlet and refer servicing to Brother Authorized
Personnel if any of the following occur:
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
12