Brother HL-2700CN Service Manual page 363

NET HEAP SIZE
HeapSize = xxxxK* (The unit is Kbyte)
Specifies the size of heap area to use with BR-Net.
In HL-2700, the minimum size is 1100K and the maximum is 4860K.
To get the heap area size:
@PJL INFO HEAPSIZE
To specify the heap area size:
@PJL DEFAULT NETHEAPLEVEL = 1 ~ 15
PS FONT CACHE
CLEAR CACHE = OFF *
CLEAR CACHE = ON
Specifies to clear the font cache or not when finishing the PS mode printing.
@PJL DEFAULT PSFONTCACHE = ON / OFF
@PJL SET PSFONTCACHE = ON / OFF
@PJL DINQUIRE PSFONTCACHE
@PJL INQUIRE PSFONTCACHE
TMA CAL MODE
TMA CAL MODE = 8 *
Specified to enable or disable Toner Mss Amount (TMA) control setting and the
TMA calibration timing (1~15).
The table in the next page shows the timing of calibration for each mode.
A-21