Yamaha YSP-30D Owner's Manual page 13

F DVD player/VCR control buttons
Control your DVD player or VCR (see pages 102 and
103).
G My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 65).
H TV POWER
Turns on the power of your TV or sets it to the standby
mode (see page 101).
I AV POWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 102 and 103).
J INPUT1
Switches the input source on your TV (see page 101).
K MACRO
Use to set the TV macro (see page 104).
L
/5
Switches the preset station number (1 to 8) when this unit
is receiving a DAB service (see page 48).
Note
This function is available only when DAB services are preset.
M SLEEP
Sets the sleep timer (see page 72).
N INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 91).
O Beam mode buttons
Change the beam mode settings (see pages 58, 64, and
65).
P SUR. DECODE
Selects the surround mode for playback (see page 61).
Q MENU
Displays the setup menu on your TV monitor (see
pages 34 and 77).
R Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
S RETURN
Selects sleep timer settings or returns to the previous SET
MENU screen.
T TV VOL +/–
Adjusts the volume level of your TV (see page 101).
U CH +/–
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages 101 and 103).
V TV MUTE, CODE SET
Mutes the audio output of your TV (see page 101).
Sets up remote control codes (see page 100).
Controls and functions
11
En