Table of Contents
Advertisement
FNC-0107TX 10/100Mbps Fast Ethernet Adapter
2.
Refer to the installation procedure provided
by networking operating system.
TROUBLESHOOTING
If you experience any problems with the adapter,
first verify that the appropriate driver is loaded,
that the proper grade of cable is employed for the
network connection, and that the supporting hub
is functioning properly.
1.
Ascertain that the adapter card is fully and
firmly seated in the slot connector.
2.
Check the length and rating of connecting
cables.
3.
Ascertain that the adapter's PCI slot is not
deactivated at the BIOS level. The CMOS
Setup utility in PCI computers ordinarily
provides the option to activate or deactivate
PCI slots.
4.
Replace the adapter in question with a
verified adapter and run RSET8139.EXE
diagnostic tests on the sofrware diskette at
directory of \DIAG\.
5.
Install the questioned adapter in another PCI
computer and run the tests again.
Remove all other PCI adapters from the
computer and run the tests again. If the
verification/diagnostic run is not normal, then
there is probably an interrupt number conflict
which will have to be resolved manually by a
CMOS Setup utility run after you have
reinstalled all of the expansion cards.
9
Advertisement
Table of Contents
