Reset Procedure; Set Mode Resetting - Yaesu FT-2900E Operating Manual

R P
ESET
In some instances of erratic or unpredictable operation, the cause may be corruption of data
in the microprocessor (due to static electricity, etc.). If this happens, resetting of the micro-
processor may restore normal operation. Note that all memories will be erased if you do a
complete microprocessor reset, as described below.
To clear all memories and other settings to factory defaults:
1. Turn the radio off.
2. Press and hold in the [ REV ( DW )] , [ LOW ( A/N )] , and [ D/MR ( MW )] keys while turning
the radio on. The "ALL RESET PUSH D
3. Press the [ D/MR ( MW )] key momentarily to reset all settings to their factory defaults
(press any other key to cancel the Reset procedure).
To reset the Set (Menu) mode settings to their factory defaults, while leaving other settings
unchanged:
1. Turn the radio off.
2. Press and hold in the [ LOW ( A/N )] and [ D/MR ( MW )] keys while turning the radio on.
The "SET MODE RESET PUSH D
SET MODE RESET PUSH D SET MODE RESET PUSH D/MR KEY SET MODE RESET PUSH D
SET MODE RESET PUSH D
3. Press the [ D/MR ( MW )] key momentarily to reset the Set (Menu) mode settings to their
factory defaults (press any other key to cancel the Reset procedure).
66
ROCEDURE
M
ICROPROCESSOR
ALL RESET PUSH D ALL RESET PUSH D/MR KEY ALL RESET PUSH D
ALL RESET PUSH D
S M
ET
MR KEY" notation will scroll on the display.
MR KEY MR KEY
MR KEY
R
ESETTING
MR KEY" notation will scroll on the display.
MR KEY MR KEY
MR KEY
R
ODE ESETTING
FT-2900E O M
PERATING ANUAL