Epcs Operation; Split Tone Operation - Yaesu FT-2900E Operating Manual

CTCSS/DCS/EPCS O
The FT-2900E can be operated in a "Split Tone" configuration, to enable operation on
repeaters using a mix of both CTCSS and DCS control via the Set mode.
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "48 SPLIT
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
set this Menu item to "ON
ture).
3. Press and hold in the [ MHz ( SET )] key for one second to save the new setting and exit
to normal operation.
When the Split Tone feature is activated, you can see the following additional parameters
following the "RV TN RV TN" parameter (while selecting the tone mode by Set mode item "49
RV TN RV TN
RV TN
SQL.TYP SQL.TYP SQL.TYP"):
SQL.TYP SQL.TYP
D CODE: DCS Encode only (the "DCS" icon will blink during operation)
D CODE D CODE D CODE D CODE
Encodes a CTCSS Tone and Decodes a DCS code
T DCS T DCS
T DCS T DCS: T DCS
(the "T" icon will blink and the "DCS" icon will appear during operation)
D TONE: Encodes a DCS code and Decodes a CTCSS Tone
D TONE D TONE D TONE D TONE
(the "T SQ" icon will appear and "DCS" icons will blink during operation)
Select the desired operating mode from the selections shown above.
FT-2900E O
PERATING
S T
PLIT ONE
48 SPLIT 48 SPLIT
48 SPLIT." 48 SPLIT
ON" (to enable the Split Tone fea-
ON ON ON
M
ANUAL
O
PERATION
PERATION
49 49
49 49
29