Installing The Electronic Box; Installing The Kit's Power Cable - Parrot MKi9200 Quick Start Manual

Installing the electronic box

x
Avoid installing the electronic box near heating or air-conditioning system, on a spot directly
exposed to sunlight or behind metal walls.
x
Make sure the electronic box stays fixed once it is installed and that it will not move while
you are driving.
x
Do not reinstall the car stereo forcibly. If you are short of space behind the car stereo to
install the electronic box, consider installing it in the glove box.

Installing the kit's power cable

Note : In order to check the wiring, connect the screen before placing it on the dashboard.
Refer to the Checking the wiring
x
Refer to your car stereo's wiring diagram.
x
The red wire of the kit's cable must correspond to the constant +12V supply, the orange wire
to the ignition +12V and the black wire to ground. Check that the orange wire is not
connected to the constant +12V supply, as you could run down the vehicle's battery.
section for more information.
6