Installing The Electronic Box; Installing The Remote Control; Installing The Microphone; Using The Parrot Mki9000 For The 1St Time - Parrot MKi9000 Quick Start Manual

Hide thumbs Also See for MKi9000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9

Installing the electronic box

Avoid installing the electronic box near heating or air-
conditioning system, on a spot directly exposed to sunlight or
behind metal walls.

Installing the remote control

• Choose the place for the remote control inside your
vehicle. We would advise you to fit it in the centre of the
dashboard.
• If you want to place the remote control on the steering
wheel, make sure it is securely attached, so it does
not move when you are driving. Do not install the
remote control on the outside of the steering wheel and
ensure it does not get in the way when driving.
• If you want to place the remote control on the dashboard,
stick the double-sided tape located on the flat side of the
bracket to fix it against the dashboard. You can then insert
the remote onto the bracket. Refer to the diagrams p.7.

Installing the microphone

Parrots microphones are directional and need to be
pointed towards the user to pick up clear speech.
Where possible the microphone should be installed near the
front roof light cluster in the centre of the vehicle with a clear
path to the user.

Using the PARROT MKi9000 for the 1st time

Associating the control unit with the remote control
If the remote control doesn't seem to be associated to the
electronic box while using the Parrot MKi9000 for the first
time, press several times the red button while holding down
the Play and green buttons until the «Pairing remote control»
message is said. This has to be done during a 30 seconds
period once the ignition is turned on.

Navigating through the menus

• Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
• Browse through the menus by turning the wheel and
confirm with the green button or by pressing the wheel.
• Press the red button or wait a few seconds to exit the menu.
Pairing and connecting a phone
to the Parrot MKi9000
Prior to using your Parrot MKi9000 with your phone for the
very first time, you must initially pair both devices.
1. From your phone, search for Bluetooth
2. Select «MKi9000» in the list.
3. Enter «0000» on your phone when prompted.
> The Parrot MKi9000 says «Pairing successful» .
peripherals.
®
11

Advertisement

Table of Contents
loading

Table of Contents