Installing The Electronic Box; Car Stereo With An Iso Connector; Car Stereo With Line-In; Car Stereo Without Iso Connectors - Parrot MKi9100 Quick Start Manual

depending on the type of car stereo and your vehicle.
• The mute function is used to cut the sound of your car
stereo to enable a phone call. The choice of the mute-in
jack depends on your car stereo's configuration.
• Make sure the cables are not pinched at the end of
the installation process.

Installing the electronic box

Avoid installing the electronic box:
- near heating or air-conditioning system;
- on a spot directly exposed to sunlight;
- behind metal walls.

Car stereo with an ISO connector

►
Refer to the installation diagram p.4.
1. Connect the male connectors of the hands-free kit to the
car stereo.
2. Join the vehicle's audio and power supply cables to the
female connectors of the Parrot MKi9100.
3. On the installation cable, connect the free yellow wire to
one of the audio system's corresponding mute-in jacks if
available (mute in 1, mute in 2 or mute in 3).
10

Car stereo with line-in

► Refer to the installation diagram p.5.
• Use this type of connection by wiring the line-out
(brown & white wire or red & black wire) to your car
stereo's line-in.
• Using the two pairs of line-out will enable you to take
advantage of the streaming audio function in stereo
over your vehicle's speakers.
• On the installation cable, connect the free yellow wire
to the corresponding audio system's mute-input if available
(mute in 1, mute in 2 or mute in 3).

Car stereo without ISO connectors

To simplify the wiring procedure, you will need to purchase
an ISO adapter cable. Refer to the range of ISO adapters on
our website: www.parrot.com.

Installing the kit's power cable

In order to check the wiring, connect the screen
before placing it on the dashboard.
► Refer to the Checking the wiring section
more information.
for