Sound; Pickup Settings; Factory Default; Exit - Universal Remote MX-890 Owner's Manual

MX-890 C LCD S
OLOR CREEN

Sound

Adjust the button beep level to Off or Loudest by
pressing the left or right hard buttons.

Pickup Settings

You can set your MX-890 to turn on when
picked up. Adjust the Pickup Sensor by pressing the
associated hard button adjacent to the ON or OFF
check box.

Factory Default

WARNING! Only use this button when instructed
to by Technical Support. It resets the memory of
the MX-890 to the factory condition. All your
programming will be lost! Press and hold the Erase
button to return the remote to its factory condition.

Exit

When you have finished adjusting Settings, simply tap the Exit button to
return to normal operation.
Page 7