Setting Up The Tv With Your Pc - Samsung 650 Series User Manual

Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video
signals it receives from the PC. The function also automatically fine-tunes the
settings and adjusts the frequency values and positions.
1 Press the
MENU
button to display the menu.
Press the. or T button to select
Picture,
then press the
ENTER
button.
Press the • or T button to select
Auto Adjustment,
then press the
ENTER
button.
2 The message
Auto Adjustment in progress. Please wait.
appears on the
screen and the picture adjustments are automatically activated.
Press the EXIT button to exit.
~
This function does not work in DVI-Digital mode.
~
Preset: Press the
SOURCE
button to select PC mode.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture
noise. If the noise is not removed by fine tuning alone, then make the vertical
frequency adjustments and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned in the center of the screen.
>-
Preset: Press the
SOURCE
button to select PC mode.
Press
MENU
button to display the menu.
Press the. or T button to select
Picture,
then press the
ENTER
button.
Press the • or T button to select
Screen,
then press the
ENTER
button.
2 Press the. or T button to select
Coarse
0
Fine,
then press the
ENTER
button.
3 Press the .... or
~
button to adjust the image, then press the
ENTER
button.
Press the
EXIT
button to exit.
English -48
A
Auto Adjustment In progress Please Wall
~
~
Move
0
Adjust (3J Enter ':) Return