Samsung 650 Series User Manual page 29

16:9
Sets the picture to 16:9
wide mode.
./
Wide Fit
Enlarges the aspect ratio
of the picture to fit the
entire screen.
Zoom1
The screen size when
Wide screen is vertically
enlarged .
4:3
Sets the picture to 4:3
normal mode.
Zoom2
The screen size when
the Zoom1 screen is
vertically enlarged.
Just Scan
Use this function to see the full
image without any cutoff when
HOMI (720p/1 080i/1 080p) or
OTV(1080i),Component(1080i/
1080p) signals are input.
Adjusting the Screen Position
You can adjust the horizontal and vertical position of the screen.
1 Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page
27)
2 Press the
~ or
T button to select Posion, then press the ENTER button.
Digital Noise Reduction
If the broadcast signal received by your
TV
is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.
1
Follow the Activating Picture Options instructions numbers
1
and
2.
(Refer to page
27)
2
Press the
~
or T button to select Digital NR, then press the ENTER button.
3
Press the
~
or
T
button to select Off, Low, Medium, High or Auto.
Press the ENTER button.
• Off:
Turns the screen noise reduction function off.
• Low: Reduces screen noise at a low level.
• Medium: Reduces screen noise at a medium level.
• High: Reduces screen noise at a high level.
• Auto: Automatically recognizes and reduces screen noise.
Press the EXIT button to exit.
Continued...
, English- 29