Samsung 650 Series User Manual page 112

To Sele t th Sour e
Use to select TV or other external input sources such as
DVD players or Cable Box/Satellite receivers (Set-Top Box)
connected to the TV. Use to select the input source of your
choice.
Front Panel L 0 Indicators
The three lights on the front panel indicate the status of your
TV.
( . : On, () : Blinking,
0 :
Off)
STAND BYI TIMER LAMP
TEMP
•
0 0
Press the MENU button to display the menu.
Press the A or T button to select Input, then press
0 0 ()
the ENTER button.
0
•
()
() () 0
()
0 ()
() 0 0
() () ()
Indication
Standby state.
The picture will automatically
appear in about 15 seconds.
Auto Timer ON/OFF has been set
and the set will automatically be
turned on in about 15 seconds.
A cooling fan inside the set is not
operating normally.
Lamp cover on the side of the set
is not properly shut.
Check if the ventilation hole on
the side of the set is blocked,
because if the inner temperature
is too
high, the power will shut off.
Lamp may be defective.
Please contact a certified
technician.
Press the ENTER button to select Source List.
Press the
A
or
T
button to select the signal source,
then press the ENTER button.
Available signal sources: TV, AV1, AV2
J
S-Video Component1
J
Component2, PC,
HDMI1, HDMI2, HDMI3/DVI, USB.
-- You can choose only those external devices
that are connected to the TV. In the Source
List connected inputs Will be highlighted and
sorted to the top
Inputs that are not connected will be sorted to
the bottom
~
MUTE
~
~
VOL
SOURCE
CH
- @]
V
English -10
• It takes about 30 seconds for the TV to warm up, so normal
brightness may not appear immediately.
• The TV has a fan to keep the inside Lamp from
overheating. You'll occasionally hear it working.
Viewing osition
To optimize your viewing comfort, please follow the guidelines
below for viewing distance.
If viewing for an extended period of time, sit as far back from
the screen as possible.
<
Top view>
72" screen:
At least 8.4 feet
.< Side view>
72" screen:
At least 8.4 feet