Connecting To A Video Source - LG RL-JA10 Owner's Manual

Connecting to a Video Source

* In AV input mode, if the auto video system recognition fails to detect a correct video system type, please press the
AUTO TRACKING
* You can connect a VTR, a camcorder, a LDP or any other compatible video image source to the projector.
< How to connect 1 >
a. Connect the AV input ports of the projector to the output ports of the A/V source with A/V cables. The video
cable is yellow and the left audio is white and right audio is red.
* In case of connecting Video 1, select Video 1.
< How to connect 2 >
b. Connect S-Video input port of the projector to S-Video output port of A/V source with S-Video cable.
* You can get better picture quality when connecting S-Video source to the projector.
29
button on the remocon. Then the projector executes the fine auto video system recognition.
RGB(PC Input) RS-232C
Audio
Component(DVD/DTV Input)
R Audio L/Mono Video S-Video
P P Y
R B
Video 1
R Audio L/Mono Video
Video 2
Audio
R L
DC Out
(12V/0.5A)
K
AC
a
b
S VIDEO
(R) AUDIO (L) VIDEO
OUT
IN