Autolamps; High Beams; Headlamp Flasher - Ford B-MAX Owner's Manual

High Beams

Pull the lever fully toward you to switch
the high beams on.
Push the lever forward to switch the high
beams off.

Headlamp Flasher

Pull the lever toward you slightly and
release it to flash the headlamps.

AUTOLAMPS

Note: It may be necessary to switch your
headlamps on manually in severe weather
conditions.
Note: If you have autolamps on, you can
only switch the high beam on once
autolamps has switched the headlamps on.
Note: If you have autolamps on, you can
only switch the front fog lamps on once
autolamps has switched the headlamps on.
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Lighting
The headlamps will switch on and off
automatically in low light situations or
during inclement weather.
The headlamps will remain on for a period
of time after you switch the ignition off.
You can adjust the time delay using the
information display controls. See
Information Displays (page 63).
Note: If you switch autolamps on in
conjunction with autowipers, low beam
headlamps will illuminate automatically
when the rain sensor turns on the windshield
wipers continuously.
48