Ford Kuga Owner's Handbook Manual page 73

One or two times can be programmed
for every day of the week.
Five days in the week
One or two times can be programmed
for the days Monday to Friday.
Single day within week
One or two times can be programmed
for one particular day of the week.
Any time and date
One time can be programmed for one
particular day in the next 12 months from
the date of programming.
Programming procedure for Seven
days in the week, Five days in the
week, Single day within week:
In the Auxiliary heater programming
menu, scroll to the relevant display using
the rotary control and press the
SET/RESET button.
When programming the function Single
day within week, choose the day using
the rotary control and press SET/RESET.
The first programme time will flash.
Press SET/RESET and the hours will
flash.
Set the hours with the rotary control.
Press SET/RESET and the minutes will
flash.
Set the minutes with the rotary control.
Press SET/RESET and the second
programme time will flash. Repeat to set
the second programme time.
Note: If only one programme time is
desired, select dashes when scrolling
through the hours and minutes. These
appear between 23 and 00 hours and
between 59 and 00 minutes.
After setting the minutes of the second
programme time, press SET/RESET and
the cursor will flash.
Information displays
71
Press SET/RESET again and the cursor
will change to a tick. The tick confirms that
the time schedules are now stored and
that the heater will have the vehicle
warmed up at the times set.
Note: It is not possible to select the
Seven days in the week, Five days
in the week and Single day within
week functions simultaneously as only
one set of times can be programmed for
each day.
If programme times for one of these
functions are stored and active, confirmed
by a tick, a lock symbol will appear in the
programming display of the other two,
showing that these functions cannot be
activated. To activate one of the other
two functions, first deactivate the function
currently active by deleting the tick.
To deactivate the function, scroll to the
relevant display and press SET/RESET
repeatedly until the tick flashes. Press
SET/RESET again to delete the tick and
deactivate the function.
Programming procedure for Any
time and date
In the Auxiliary heater programming
menu, scroll to this display using the rotary
control and press the SET/RESET
button.
The hours will flash.
Set the hours with the rotary control.
Press SET/RESET and the minutes will
flash.
Proceed in the same way to set the
minutes, the month and the day.
After setting the day, press SET/RESET
and the cursor will flash.
Press SET/RESET to confirm the
settings. The cursor will change to a tick.
The tick confirms that the time schedule
is now stored and the heater will have the
vehicle warmed up at the time set.