Ford Kuga Owner's Handbook Manual page 154

WARNING
If you experience heavy vibrations,
unsteady steering behaviour or
noises while driving, reduce your
speed and drive with caution to a place
where it is safe for you to stop the vehicle.
Recheck the tyre and its pressure. If the
tyre pressure is less than 1.3 bar (19 psi)
or if there are any cracks, bumps or similar
damage visible, do not continue driving
with this tyre.
Checking the tyre pressure
1. Stop the vehicle after driving
approximately three kilometres
(two miles). Check, and where
necessary, adjust the pressure of the
damaged tyre.
2. Attach the kit and read the tyre
pressure from the pressure gauge F.
3. If the pressure of the sealant-filled tyre
is 1.3 bar (19 psi) or more, adjust it to
the specified pressure. See
Technical specifications (page
156).
4. Follow the inflation procedure once
again to top up the tyre.
5. Check the tyre pressure again from
the pressure gauge F. If the tyre
pressure is too high, deflate the tyre
to the specified pressure using the
pressure relief valve B.
6. Once you have inflated the tyre to its
correct tyre pressure, move the
compressor switch H to position 0,
remove the power plug G from the
socket, unscrew the hose C, fasten
the valve cap and replace the
protective cap A.
7. Leave the sealant bottle K in the bottle
holder E and store the kit away safely
in its original location.
Wheels and tyres
8. Drive to the nearest tyre specialist to
Note: Remember that emergency
roadside tyre repair kits only provide
temporary mobility. Regulations
concerning tyre repair after usage of tyre
repair kit may differ from country to
country. You should consult a tyre
specialist for advice.
specifications (page 156). Monitor the
tyre pressure until the sealed tyre is
replaced.
Empty sealant bottles can be disposed
of together with normal household waste.
Return remains of sealant to your dealer
or dispose of it in compliance with local
waste disposal regulations.
152
get the damaged tyre replaced.
Before the tyre is removed from the
rim, inform your tyre dealer that the
tyre contains sealant. Renew the kit
as soon as possible after it has been
used once.
WARNING
Before driving, make sure the tyre
is adjusted to the recommended
inflation pressure. See Technical