Deployment and Configuration 3 - 11
Monitor Devices tab
Use the Monitor Devices tab (see
Figure
3-12) to monitor the CA10s that are on your network. The information
shown on this screen is automatically refreshed as new data is received from an active CA10.
This screen enables you to view the CA10s based on Name, IP Address, Profile, Time, Firmware, Hardware,
Access Point, Serial Number, Signal, Battery Power and Channel Status.
Devices send an update every 60 seconds, so any information on the Monitor Devices tab may be delayed by a
maximum of 60 seconds.
Monitor Devices Tab
Figure 3-12
Name
Display the names of the CA10 units that are registered in the system database. After a device is discovered, it
remains in the asset inventory until it is purged from the database.
IP-Address
Displays a view of the IP address of all CA10s.
Active Profile
The profile number of the CA10 that is set in the Device Profiles Tab.