Checking The Blades - Husqvarna Rider 16 Operator's Manual

Checking the blades

To achieve the best mowing results it is important
that the blades are undamaged and well-sharpened.
Check that the blades' attachment screws are tight.
IMPORTANT INFORMATION
Replacing or sharpening the blades should
be conducted by an authorised service
workshop.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.
IMPORTANT INFORMATION
On the Bioclip unit the relative positioning
of the blades should always be as shown
in the diagram with an angle of 90
between the blades. Otherwise the blades
can go against each other and damage
the unit.
36
– English
MAINTENANCE
BioClip103
BioClip 90
Cutting units with rear ejection
Cutting units with side ejection