Professional digital two-way radio system (44 pages)
Summary of Contents for Vertex Standard VX-920
Page 1
VX-920 PERATING ANUAL VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. YAESU EUROPE B.V. P.O. Box 75525, 1118 ZN Schiphol, The Netherlands YAESU UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K.
You now have at your fingertips a valuable communications tool-a VERTEX STANDARD two-way radio! Rugged, reliable and easy to use, your VERTEX STANDARD radio will keep you in constant touch with your colleagues for years to come, with negligible maintenance down-time.
SAR compliance for body-worn use was only demonstrated for the specific belt-clip Part Number (#RA060190A). Other body-worn accessories or configurations may NOT comply with the FCC RF exposure requirements and should be avoided. Always use Vertex Standard authorized accessories. VX-920 O PERATING...
“tog- gling the two colors.” SIDE SEL 1 Key MIC/SP Jack PTT Switch ( External MIC/SP ) MONITOR Button SIDE SEL 2 Button Sub Microphone ( Noise Canceling MIC ) Main Microphone Battery Pack Latch Speaker VX-920 O PERATING ANUAL...
Caution Danger of explosion if battery is replaced with an incorrect battery. Replace only with the same Insert the Battery Pack or equivalent type. VX-920 O PERATING ANUAL...
If you have a Speaker/Micro- channel. phone, we recommend that it not be connected until you are familiar with the basic operation of the VX-920. VX-920 O PERATING ANUAL...
Page 7
Speak into the microphone area of the will be activated. See the next section for details front panel grille in a normal voice level. To re- regarding the available features. turn to the Receive mode, release the PTT switch. VX-920 O PERATING ANUAL...
Page 8
Instead, the radio will generate short beep three times. Release the PTT switch and wait for the channel to be clear of activity. VX-920 O PERATING ANUAL...
Programmable key Toggle Switch Functions and TOGGLE switch on your particular radio, and The VX-920 includes the TOP SEL, MONITOR, keep it handy. SIDE SEL 1, and SIDE SEL 2 keys, and the TOGGLE switch.
Operation will revert to the “Dual Watch Start” time it finds a channel on which someone is speak- channel. ing. Press the assigned programmable key again to disable scanning. Operation will revert to the pro- grammed revert channel. VX-920 O PERATING ANUAL...
Page 12
Note that your dealer may have mode provision for “Talk Around” channels by programming “repeater” and “Talk Around” frequencies on two adjacent chan- nels. If so, the key may be used for one of the other Pre-Programmed Functions. VX-920 O PERATING ANUAL...
Page 13
User-assigned Priority Channel, the radio will The Priority Channel you have assigned (before switch between it and the Dealer-Assigned Priority pressing the key) will be retained in memory until Channel, if any. you change it. VX-920 O PERATING ANUAL...
Page 14
3-digit Page Call code, used to call other simi- Emergency larly-equipped stations. Press the assigned program- The VX-920 series include an “Emergency” feature mable key, followed by the three digits representing which may be useful for alerting another party moni- the Page Call code of the station you wish to call.
Page 15
TA (Talk Around) scan feature “On” and “Off.” AF M While TA scan is proceeding, the VX-920 will search Press the assigned programmable key to reduce the both the transmit and receive frequencies. When a audio output to the (lower) level programmed by your signal is encountered on the receive frequency, the Dealer.
Radio to Radio Programming Cable Availability of accessories may vary; some accessories are supplied standard per local requirements, others may be unavailable in some regions. Check with your VERTEX STANDARD Dealer for changes to this list. VX-920 O PERATING ANUAL...
Page 19
This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Page 20
Copyright 2005 VERTEX STANDARD CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. Printed in Japan...