SERVICE AND ADJUSTMENTS
•
Repeat on opposite side of tractor.
•
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
•
Repeat on opposite side of tractor.
•
Turn steering wheel to position wheels straight for-
ward.
•
ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F) and secure with
retainer spring (G) through hole in link located behind
the bracket.
•
Insert other end of link (E) into hole in front mower bracket
(H) and secure with washer and retainer spring (J).
K
C
D
FIG. 21
L
C
D
F
•
Disengage belt tension rod (K) from locking bracket (L).
•
Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower
pulley grooves.
•
Engage belt tension rod (K) on locking bracket (L).
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and
engage slowly.
•
Raise attachment lift lever to highest position.
•
If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this
manual.
B
M
A
S
FIG. 24
20
E
G
FIG. 22
M
FIG. 23
F
E
H
H
J