Stopping The Engine; Disengage Lever - Husqvarna ProFlex 18 Operator's Manual

Stopping the engine

Preferably let the engine idle a minute in order to
attain normal operating temperature before
stopping it if it has been worked hard. Avoid idling
the engine for long periods, as there is a risk of
carbon build-up on the spark plugs.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.

Disengage lever

The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
DRIVING
6007-214
6007-215
6004-212
6007-216
19
English –