Planet GT-902 User Manual page 43

The VLAN Group Web page includes the following configurable data:
VLAN Mode
Management VLAN Group
VLAN Group
VID
TP
Member
Fiber
Apply button
When change the Management VLAN Group setting, please assure the TP or fiber port that
Notice:
connect to administrator PC is in the same VLAN Group, otherwise, for further managed is
impossible. The only solution is press the reset button 10 seconds for system reset to default
mode.
Figure 4-28 VLAN Group Web Page screen
Provide Disable or enable the IEEE 802.1Q VLAN operation mode. Default mode is
Disable.
Provide define the Management VLAN group. Default mode is VLAN1.
Indicate the VLAN Group from 1 to 16.
Provide define the VLAN Group ID and the available options are 1 to 4094.
Provide assign TP port into VLAN Groups.
Provide assign Fiber port into VLAN Groups.
Press this button for save current configuration of Managed Media Converter.
Table 4-9 Descriptions of the VLAN Group Web Page Screen Objects
-38-