Ventilation Product User Manual - Interlinked Operation With Direct Expansion Ventilation; Ventilation Product User Manual - Single Operation With Direct Expansion Ventilation - LG PQRCVSL0 Owners & Installation Manual

Owner's instruction

Ventilation Product User Manual - Interlinked Operation with Direct Expansion Ventilation

It can only be used when the air conditioner is interlinked with direct expansion ventilation product.
58 New Wide Wired Remote Controller
Interlinked Operation with Direct
Expansion Ventilation
1 Press button on the remote
controller.
- It is used only when air conditioner
and the ventilation product are
interlinked. ('Interlinked operation' displayed
on the remote controller display)
2 Pressing button in ventilation
mode starts ventilation.
3 Pressing button in ventilation
mode will change the ventilation
mode.
- Every time the button is pressed,
it changes from 'Heat exchange → normal →
automatic'.
❈ The display on the remote controller
displays only when it is in ventilation mode,
and when it converts to air conditioner
mode, it displays the desired temperature.
4 Pressing button in ventilation
mode changes the strength of wind.
- Pressing the button can select from
'weak → strong → very strong'.
5 Changing back to air conditioner mode
1) Automatic Conversion : when no button is
pressed for 15 seconds or longer, it
automatically converts back to air
conditioner mode.
2) Manual Conversion : Pressing button
in ventilation mode will manually convert.

Ventilation Product User Manual - Single Operation with Direct Expansion Ventilation

Pressing It performs ventilation operation with cooling or heating at the same time using the heat
exchanger inside the direct expansion type ventilation product.
Owner's instruction
Direct expansion type ventilation single operation
1 button on the remote controller.
It displays as the figure right side in
the direct expansion type ventilation
single operation.
2 Pressing button will change the
ventilation mode.
Pressing the button converts from 'heat
exchange → normal → automatic'.
Ventilation
Remote Controller
Contents
mode
Display
Heat
Circulate indoor air without loss of heat
exchange
Directly circulate indoor air without going
Normal
through heat exchanger
Circulate indoor air with automatically
Automatic
comparing indoor and outdoor air
❈ The 88 segment display above is only displayed
when it is in direct expansion type ventilation
single operation and the air conditioner is
stopped.
3 Pressing button will change
operation mode.
- Pressing the button will convert
from 'cooling → eating → automatic -> stop'.
4 Pressing button in ventilation
mode changes the strength of wind.
- Pressing the button can select
from 'weak → strong → very strong'.
❈ Cooling/heating operation selection and the
desired temperature can be adjusted in
direct expansion type ventilation single
operation.
❈ Refer to the basic operation - temperature
adjustment for changing desired
temperature.
Ownerʼs & Installation Manual 59