Table of Contents
Advertisement
INSTALLER SETTING
170
Air conditioner Fan operation interlocked with ventilation setting
(air conditioner)
It is the function to set the air conditioner fan operation if the ventilation is operated while the air
conditioner operation is stopped when the air conditioner and the ventilation are installed to
interface with each other.
• You can set the following setting values using [<,>(left/right)] button.
Value
Off
The air conditioner indoor unit Fan is Off during the ventilation interface
The air conditioner indoor unit operates in very weak wind during the
On
ventilation interface
- When the air conditioner operation is Off, if the ventilation product is in operation, the air
conditioner fan shall be operated, and when the fan is in operation, dust may fall, so it is the
function to set the air conditioner fan operation status in case of ventilation interface through
the setting.
Description
Indoor unit Auto-Start setting (air conditioner / DX ventilator)
It is a function that sets whether to restore the indoor unit operation by resuming the previous
power-on state or as power-off state in the power failure compensation.
• You can set the following setting values using [<,>(left/right)] button.
Value
Use
Use indoor unit auto restart
Not use
Not use indoor unit auto restart
INSTALLER SETTING
171
Description
Advertisement
Table of Contents
