Table of Contents
Advertisement
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: Make sure the wheel and hub
contact surfaces are free from foreign
matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
E76138
3. Install the locking wheel nut key.
Wheels and tyres
E75442
4. Partially tighten the wheel nuts in the
5. Lower the vehicle and remove the
6. Fully tighten the wheel nuts in the
7. Install the hub cap or cover using the
Note: If the spare wheel is different in size
or construction to the road wheels, have
this replaced as soon as possible.
Stowing the wheel
if lowered without a wheel attached.
109
1
3
5
sequence shown.
jack.
sequence shown.
ball of your hand.
WARNING
Have the wheel nuts checked for
tightness and the tyre pressure
checked as soon as possible.
CAUTION
Do not raise the spare wheel carrier
without the wheel attached. Damage
can occur to the winch mechanism
4
2
Advertisement
Table of Contents
