Is Your Motorcycle Ready To Ride; Pre-Ride Inspection - Honda CRF450R 2006 Owner's Manual

Competitive riding can be tough on a motorcycle,
so it's important to inspect your CRF and correct
any problems you find before each ride. Check
the following items (page numbers are at the
right):
WARNING
Improperly maintaining this motorcycle or
failing to correct a problem before riding
can cause a crash in which you can be
seriously hurt or killed.
Always perform a pre-ride inspection
before every ride and correct any
problems.

Pre-ride Inspection

Check the following before each ride:
• Engine oil level .............................................37
• Transmission oil level...................................40
• Coolant for proper level............................... 41
• Cooling system and hoses for condition.......42
• Spark plug for proper heat range, carbon
fouling and high tension cord terminal for
looseness .......................................................54
• Air cleaner for condition and
contamination................................................43
• Clutch lever adjustment and freeplay ...........49
• Hot starter operation and freeplay ................53
• Breather drain for cleaning ...........................45
• Steering head bearing and related parts
for condition..................................................92
• Carburetor throttle operation ........................46
• Tires for damage or improper inflation
pressure ........................................................84
• Spokes for looseness.....................................83
• Rim locks for looseness................................83
• Front and rear suspension for proper
operation ..................................................74,75
• Front and rear brakes, check operation ........79
• Drive chain for correct slack and adequate
lubrication .....................................................86
• Drive chain guide, sliders and guide rollers
for damage or wear ..................................86,87
• Exhaust pipe/Muffler inspection,
removal and installation......................89,90,91
• Every possible part for looseness (such as
cylinder head nuts, engine mounting bolts,
axle nuts, handlebar holder bolts, fork bridge
pinch bolts, drive chain adjuster, drive chain
guide, wire harness connectors, kickstarter
mounting bolt) .........................................92,93

Is Your Motorcycle Ready to Ride?

9
Before Riding