Honda CRF450R 2006 Owner's Manual page 114

Front Suspension Adjustments
27.Install and tighten the number plate bolt (30).
Install the handlebar pad (31).
(30)
(30) number plate bolt
(31) handlebar pad
28.With the front brake applied, pump the fork
up and down several times to seat the axle and
check front brake operation.
29.While keeping the forks parallel, alternately
tighten the right fork pinch bolts (32) to the
specified torque:
15 Ibf·ft (20 N·m, 2.0 kgf·m)
110
Adjustments for Competition
(32)
(31)
(32) axle pinch bolts
NOTICE
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the
left fork leg clamp inner surface.
30.Clean the threads of the disk cover bolts and
axle holder thoroughly. Apply locking agent
to the bolt threads.
Install the disc cover (33) and tighten the
bolts (34) to the specified torque:
10 Ibf·ft (13 N·m, 1.3 kgf·m)
(33) disc cover
31.Turn the rebound damping adjusters back to
their original settings.
(33)
(34)
(34) bolts