Radio Shack Cordless Telephone Owner's Manual page 11

Problem
The handset stops working or
works poorly during a call.
If you still have problems, disconnect the phone. If other phones on the same line work properly,
the fault is in this phone or its installation. If you cannot find the problem, take your phone to your
local RadioShack store for assistance.
CARE
Keep the phone dry; if it gets wet, wipe it dry
immediately. Use and store the phone only in
normal temperature environments. Handle the
phone carefully; do not drop it. Keep the
phone away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it look-
ing new.
Move the handset closer to the base.
Lift the base's antenna to a fully vertical position.
If the base lost power while the handset was off of it, the security
access-protection code might have changed. With the handset
removed from the base, restore power to the base, then place the
handset back on the base. The CHARGE/IN USE indicator lights, indi-
cating that the code is set again.
Be sure the handset's battery pack is charged. (If the battery pack
power is too low, it does not have enough power to light the TALK/
BATT indicator.)
Modifying or tampering with the phone's inter-
nal components can cause a malfunction and
might invalidate its warranty and void your
FCC authorization to operate it. If your phone
is not performing as it should, take it to your
local RadioShack store for assistance. If the
trouble is affecting the telephone lines, the
phone company can ask you to disconnect
your phone until you have resolved the prob-
lem.
11
Suggestion