Parts Identification (Callout) - LG WM0742H Series Training Manual

TRAINING MANUAL WM0742HGA
PARTS IDENTIFICATION
The air vent on the back of the machine must be left open and clear at all times.
If the washer and dryer are installed in a closet or closed laundry alcove, there must be
sufficient clearance and ventilation. The closet should have a full louvered door with at
2
least 800 square inches (0.5 m ) of open area for ventilation.
The washer requires a space of at least 1 inch (2.5 cm) between the wall and the
machine on each side and at least 4 inches (10 cm) between the back of the washer and
the wall. Additional space may be needed for servicing.
WM0742HGA Page 11 TRAINING MANUAL