Host Unreachable; Ts Error - Invalid Or No Serial Number - Fujitsu FUTRO DC20-1 Operating Manual

Host unreachable...

When the access device cannot connect to the host PC, this message appears.
► Make sure the server connection list is configured correctly. See the section
about configuring the access device
► Make sure the vSpace software is installed on the host PC.
► Make sure the host computer and access device are in the same subnet/local area network.
► Make sure any firewall or anti-virus programs installed in the host computer or
network equipment are compatible with the vSpace software.
TS ERROR – INVALID OR NO SERIAL NUMBER!
This message appears when no serial number exists in the host computer. This message
does not indicate an error regarding the serial number of the access device.
► See the section about product registration to register the vSpace software and the access devices.
Fujitsu Technology Solutions
Troubleshooting error messages
65