Usb-Device Assignment(S) - Fujitsu FUTRO DC20-1 Operating Manual

USB-Device Assignment(s)

In the USB-Device Assignment(s) tree item, you can control connections between USB ports on the
host and Space sessions. To use this function, navigate the tree to select a USB port. When you
right-click on an entry under USB-Device Assignment(s), you can de-select the Hide the ports that are
not connected item to see all ports. After selecting a port, the following information is displayed:
• The port number.
• If a device is connected, the device's simple name.
• The device's longer name, usually including the manufacturer and model.
• A check box for Allow all users access to every USB port. When this is selected, all USB ports
are connected, as if in one hub. When the box is not checked, a list of available USB ports is
displayed where you can select which one(s) is/are to be connected to the selected device. This
list shows each access device's MAC address and its serial number along with a checkbox.
When you click on the Apply button, changes to the USB-Device assignments are saved. To discard
changes, simply navigate to another tree item or close the console without clicking on the Apply button:
Fujitsu Technology Solutions
Using the vSpace Management Console
49