Defining Non-Supported Os Access Settings; Setting Test Properties - HP ProCurve NAC 800 User Manual

NAC Policies
NAC Policy Tasks
TIP:
NOTE:
6-16
inactivity quarantine, the end-user may just need to log in again; however,
other changes (such as a policy change or new required hotfix) may require
the end-user to perform some action before being allowed on the network
again.
To set the time an end-user can be inactive:
Home window>>NAC policies>>Select a NAC Policy>>Basic settings menu
option
In the Inactive endpoints area, enter how long an end-user can be inactive
1.
before they are quarantined.
A lower number ensures higher security.
Click ok.
2.

Defining Non-supported OS Access Settings

To define what actions to take for endpoints with non-supported operating
systems:
Home window>>NAC policies>>Select a NAC Policy>>Basic settings area
In the Operating systems area, select the check box beside any operating
1.
system that you will allow access without being tested.
2. Click ok.

Setting Test Properties

Test properties are specific to the particular test. Select the properties you
want applied. Tests are explained in detail in "Tests Help" on page B-1.
To set the test properties for a specific test:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1. Click on the name of test to display the test's options.
Click a test name to display the options; select the test check box to enable
the test for the policy you are modifying.