HP ProCurve NAC 800 User Manual page 253

Automatically connect the user through domain authentication ("Agentless
■
Credentials" on page 3-122)
■ Require the user to log in. End-users must set up their local endpoints to
have a Windows administrator account with a password in order to be tested
by NAC 800.
NOTE:
TIP:
If the end-users are required to log in, or if the automatic connection methods fail,
they must log in using the following window:
Figure 5-35. End-user Login Credentials
If the Allow end-users to have their administrator login information saved for future access
option is selected on the System Configuration>>Testing methods window, the end-user
login window presents a check box option to the end-users, allowing them to save
their login credentials.
If the login credentials are correct, the Testing window is displayed (see "Testing
Window" on page 5-47).
NAC 800 uses the Windows Messenger Service when using agentless testing.
If you have disabled this service (http://www.microsoft.com/windowsxp/
using/security/learnmore/stopspam.mspx), agentless testing will not work.
If the end-user has not defined a login/password combination, the default
login is usually administrator with a blank password.
End-user Access
End-user Access Windows
5-45