Agentless Credentials; Adding Windows Credentials - HP ProCurve NAC 800 User Manual

Hide thumbs Also See for ProCurve NAC 800:

Table of Contents

System Configuration

Cluster Setting Defaults

You can verify your changes to the end-user access screens immediately by

pointing a browser window to port 88 of your NAC 800 installation. For

example, if the IP address of your NAC 800 installation is 10.0.16.18, point the

browser window to:

http://10.0.16.18:88

Agentless Credentials

When NAC 800 accesses and tests endpoints, it needs to know the adminis-

trator credentials for that endpoint. If your network uses a Windows domain

controller and the connecting endpoint is a member of a configured domain,

NAC 800 uses the information supplied to access and test the endpoint.

Setting windows credentials here sets them as default settings for all clusters.

You can override these settings on a per-cluster basis by selecting a cluster

first, and then making changes in Agentless credentials.

To add Windows credentials:

Home window>>System configuration>>Agentless credentials