Ryobi RPPGM Operator's Manual page 10

Measured sound power level
Idle
Racing
Sound power level (in accordance
with Annex B of EN ISO 11680-1)
CHaIN sPECIfICatIONs
Chain pitch
Chain gauge
Chain drive links
Chain profile
Chain file size
Bar length
Chain bar oil tank capacity
KNOW yOUR PRUNER
See figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ENGINE sWItCH
The engine switch controls the ignition system. The switch
must be in the ON (I) position for the engine to start and
run.
PRIMER BULB
The priming bulb pumps fuel from the fuel tank to the
carburettor. This is necessary only when starting a cold
engine or after refuelling an engine that has run out of fuel.
sHOULDER stRaP
The shoulder strap helps support the weight of the pruner
during use.
CHOKE LEVER
The choke restricts the air supply through the carburettor
to enrich the mixture and enable easier starting when the
engine is cold.
staRtER GRIP
The starter grip is used for starting the engine.
tHROttLE tRIGGER
The throttle trigger is used for starting the pruner, and also
for controlling the speed of chain rotation.
RPPGM_SAA_MAN_ENG_20110215_D8.indd 8
English
assEMBLy
UNPaCKING
81.9 dB(A)
This product requires assembly.
106.0 dB(A)
■ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
113 LWA(dBpA)
packing list are included.
■ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
9.5mm
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
1.1mm
product.
40
PaCKING LIst
Low profile
■ Power head assembly
5/32
■ Pruner attachment
254 mm (10 in) ■ Extension shaft
■ Scabbard
230 ml
■ Combination wrench (5/8 in. X 3/4 in.)
■ 230 ml bar and chain lubricant
■ Bottle of 2-stroke lubricant
■ Shoulder strap hanger (with mounting hardware)
■ Shoulder strap
■ "J" handle assembly (with mounting hardware)
■ Hanger cap
■ Operator's manual
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
To prevent accidental starting that could cause serious
personal injury, always disconnect the engine spark
plug wire from the spark plug when assembling parts.
8
WaRNING
WaRNING
WaRNING
15/02/2011 11:38 AM