Maintenance; Residual Risks; Environmental Protection; Intended Use - Ryobi RLT5030 Original Instructions Manual

– cleaning your product
– changing accessories
– checking for any damage after hitting an object
– checking for any damage if the product starts to
vibrate abnormally
– performing maintenance
Wear protective glasses or goggles.
Take care against injury from any device fitted for
trimming the filament line length.
Disconnect the product from the mains before checking,
cleaning or working on the product and when it is not in
use.
Always ensure that ventilation openings are kept clear
of debris.
Inspection after dropping or other impacts: Thoroughly
inspect the product and identify any affections or
damage with it. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
For damaged, loose or broken parts
For loose or damaged fasteners
Handles and hand guards

MAINTENANCE

After use, disconnect the product from the mains and
check for damage.
Use only manufacturer's recommended replacement
parts and accessories.
After extending new cutter line, always return the
product to its normal operating position before switching
on.
After each use, clean with a soft dry cloth.
Check the product regularly to make sure that it will
operate properly and perform the intended function.
Any part that is damaged should be properly repaired
or replaced by an authorized service centre.
When not in use, the product should be stored in a cool
dry place and locked up out of the reach of children. Do
not store outdoors.

INTENDED USE

This product is only intended for use outdoors. The product
is designed for cutting grass and light weeds only in private
garden areas.
Line trimmer
The product is intended for cutting long grass, pulpy weed,
brush and similar vegetation at or about ground level.
Edger
The product is intended for cutting neat edges to grass
lawns.
2
WARNING
The product should not be used to cut or trim hedges,
bushes or other vegetation where the cutting plane is not
parallel to the ground surface.
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

RESIDUAL RISKS

It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
After each period of operation, exercise to increase
blood circulation.
Take frequent work breaks. Limit the amount of
exposure per day. If you experience any of the
symptoms of this condition, immediately discontinue
use and see your physician about these symptoms.

ENVIRONMENTAL PROTECTION

The product, accessories and packaging
should be sorted for environmentally friendly
recycling. Consult your local waste authority
for information regarding available recycling
and/or disposal options.
SYMBOLS
Read the operation manual and follow all
warnings and safety instructions.
Wear ear protection.
Wear eye protection.
Safety
WARNING