For environmental reasons, do not throw away a spent battery pack. Please
return spent battery packs to your TOSHIBA dealer.
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
4. Gently press the battery into the battery bay until the latch clicks into
place.
5. Lock the Battery Pack Lock and Battery Pack Release Latch to secure
the installation.
Satellite A80
2
Removing the battery pack-2
Installing the battery pack
Power System
3
Battery
2
1
Battery
6-11