Video Mode; Usb/Home Media Device Compatibility; Power Save Settings - Sharp LC-40LE730E Operation Manual

Useful viewing functions

Video mode

Reproduces films and videos.
1 Select Video mode and press OK.
2 Select the files you want to reproduce with ▲/▼ /◄/►
buttons and press OK to start the reproduction.
3 Press OK to stop / restart the reproduction.
4 Press END to exit the Video mode.
Buttons for video reproduction mode
Buttons
▲/▼ Cursor
Go to the previous/next chapter.
◄/► Cursor
Backward / Fast forward
END button
Go back to the previous screen.
RED button
Allows you to repeat a fragment of a film
indefinitely. The first keystroke defines
initial point, the second keystroke defines
final point. The third keystroke restarts the
normal reproduction.
BLUE button
Allows you to backward or forward until a
point in the movie.
Introduce "hh:mm:ss", select "Seek" and
press OK.
OK button
Play / Pause the reproduction.
MENU button
Shows the menu to adjust the video
image during reproduction.
f button
Performs ZOOM operation in films and
videos.
28
Description
USB / HOME MEDIA device
compatibility
USB 2.0 USB Memory, USB card reader, USB
device HDD (Mass Storage class)
File system USB REC: NTFS
USB Media Player: FAT / FAT32 / NTFS
Home Media DLNA 1.5 DMP
(DLNA) (Digital Media Player certified)
Photo file JPEG, PNG
format
Music file Mpeg 1 (Layer 1 & L2), MP3
format Sampling frequency: 8Khz, 11.025 Khz,
12Khz, 16Khz, 22.050Khz, 32Khz, 44.1
Khz, 48 Khz
HEACC, AAC (MP4), WAV (PCM),
WMA, AC3, EAC3.
Sampling frequency:32Khz, 44.1 Khz,
48 Khz
Multimedia TS (Transport Stream), MOV, MP4,
Container MKV, MPG (MPEG2 Program Stream),
WMV, ASF, AVI, DivX, RM, RMVB, FLV,
VOB
Video file MPEG1, MPEG2, MPEG4, DivX, XVid,
format AVC/H.264, VC-1, AVS, Divx311 (SD
Only), RealVideo
NOTE
•
Progressive format jpeg files are not supported.
•
Music files in USB 1.1 devices may not be played properly.
•
Operation using USB hubs is not guaranteed.
•
The external hard disc with capacity exceeding 1TB cannot
be detected correctly.
•
Cables used to prolong the USB device must be certified
as USB 2.0.
•
In USB devices, video files may not be played properly if
speed is not enough.
•
Play non-standard encoded files is not guaranteed.
•
The file extension does not uniquely specify a file's contents.
It's very common for Internet files to have a mismatch
between the file extension and its contents; for this reason
some files could not be played in this TV set.

Power save settings

This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
In menu Picture → Picture Mode select the ECO
setting.