Pc Compatibility Chart - Sharp LC-40LE730E Operation Manual

Connecting a PC
1
Adjusting the PC image
automatically
1
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/VGA conversion
cable, etc.
Press b to select PC-RGB from Source List,
1.
and then press OK.
2. Press MENU key.
Press ◄ key to select "Settings" and press OK.
3.
Press ▼ key to select "Input Settings" and press
4.
OK.
Press ▼ key to select "PC Settings" and press
5.
OK.
Press ▼ key to select "Auto Adjustment" and
6.
press OK.
NOTE
•
When connect a PC and select PC-RGB source, the "Auto
adjustment" is executed automatically.
•
"Auto adjustment" may fail if the PC image has low
resolution, has unclear (black) edges, or is moved while
executing "Auto adjustment".
•
Be sure to connect the PC to the TV and switch it on before
starting "Auto adjustment".
•
"Auto adjustment" can be executed only when inputting
analogue signals through the "PC IN" terminal.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary
to change image position using "Auto Adjustment".
In some cases, however, manual adjustment is needed
to optimise the image.
Press b to select PC-RGB from Source List,
1.
and then press OK.
2. Press MENU key.
Press ◄ key to select "Settings" and press OK.
3.
Press ▼ key to select "Input Settings" and press
4.
OK.
Press ▼ key to select "PC Settings" and press
5.
OK.
Press ▲/▼ to select the specific adjustment item.
6.
Press ◄/► to adjust the item to the desired
7.
position.
H-Pos.
Centres the image by moving it to the
left or right.
V-Pos.
Centres the image by moving it up or
down.
Phase
Adjusts when characters have low
contrast or when the image fl ickers.
Clock
Adjusts when the image fl ickers with
vertical stripes
Auto
Adjusts automatically the image
Adjustment
Reset
Return to the original image.
Settings
NOTE
•
The "PC Settings" options in the "Settings" menu can be
adjusted only when inputting analogue signals through the
"PC IN" terminal.
•
Depending of resolution, the vertical/horizontal manual
range can be different.

PC compatibility chart

Resolution
640 g 480
VGA
720 g 400
VGA
800 g 600
SVGA
1.024 g 768
XGA
WXGA 1.360 g 768
1.280 g 1.024
SXGA
1.400 g 1.050
SXGA+
1.600 g 1.200
UXGA
1.920 g 1.080
1080p
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are
registered trademarks of International Business Machines
Corporation.
NOTE
•
This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly to
the VESA 60 Hz standard. Any variations from this standard
may result in picture distortions.
Item
Horizontal Vertical
Frequency Frequency
31,5 kHz 60 Hz
31,47 kHz 70 Hz
37,9 kHz 60 Hz
48,4 kHz 60 Hz
47,7 kHz 60 Hz
64,0 kHz 60 Hz
65,3 kHz 60 Hz
75,0 kHz 60 Hz
67,5 kHz 60 Hz
17