Watching Tv; Daily Operation; Switching On/Off; Switching Between Analogue And Digital Broadcasts - Sharp LC-40LE730E Operation Manual

Watching TV

Daily operation

Switching on/off

Turning on/off the power
Press a on the TV to switch it on.
Switch it off by pressing a on the TV.
Standby mode
E
Switching to standby mode
If the TV is switched on (BLUE LED), you can switch
it to standby by pressing TVa on the remote control
unit.
E
Switching on from standby
From standby (RED LED), press TVa on the remote
control unit.
TV indicator status
LED indicator
Off
Blue
Red
Violet StandBy with USB REC programmed
NOTE
•
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
•
A small amount of electric power is still consumed even
when a is turned off.
Switching between digital, satellite
and analogue broadcasts
Press "ATV", "DTV", "SAT" or "RADIO" to
E
change between modes.
USB REC

Changing channels

With Pr/s:
10
NOTE
• When turning off the power
using a on the TV, EPG
data will be lost.
• The terminal layout may differ
depending on the model.
F AV
Status
Power off
Power on
Standby
F AV
With 0–9:

Selecting an external video source

Once the connection is made,
press b to display the
"Source List" screen,
and then press a/b to
switch over to the appropriate
external source with OK.

Selecting audio language

E
DTV/CADTV/SAT mode:
Each time you press 2 the audio language switches
between audio sources available.
NOTE
•
The audio mode screen disappears in three seconds.
•
Selectable items vary depending on the received
broadcasts.
E
ATV mode:
Each time you press 2, the mode switches as shown
in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo NICAM STEREO, MONO
Bilingual NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo STEREO, MONO
Bilingual CH A, CH B, CH AB
MONO
Monaural
NOTE
•
When no signal is received, the audio mode will display
"MONO".
Switching subtitle languages
E
DTV/CADTV/SAT mode:
Press SUBTITLES [ button to change between
different languages available, or to enabled/disabled
the subtitles.
E
ATV mode:
The available subtitles according to the broadcasting
will be enabled or disabled by pressing the SUBTITLES
[ key.
6
6