Engine Shut-Off Cord (Lanyard); Engine Oil - Yamaha F50 Owner's Manual

Operation
turns smoothly and that it completely re-
turns to the fully closed position.
Look for loose or damaged connections of

the throttle and shift cables.
Remote control models:
Turn the steering wheel full-right and full-

left. Make sure operation is smooth and
unrestricted throughout the whole range
with no binding or excessive free play.
Operate the throttle levers several times to

make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
Look for loose or damaged connections of

the throttle and shift cables.
EMU36483

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
56
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
ZMU07105
3. Engine shut-off switch
EMU40993

Engine oil

1. Place the outboard motor in a vertical
position (not tilted). NOTICE: If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
2. Remove the oil dipstick and wipe it
clean.
[ECM01861]