Warm & Hold; Adjusting Oven Temperature - Kenmore 970-6561 Series Use & Care Manual

Setting Oven Controls
Warm & Hold™
Warm & Hold will keep cooked foods warm for serving up
to 3 hours after cooking has finished. After 3 hours the
Warm & Hold will shut-off automatically. Warm & Hold
should only be used with foods that are already at serving
temperatures. Warm & Hold will maintain the oven
temperature at 170° F (77°C).
FOOD POISONING HAZARD. Do not let
food sit for more than one hour before or after cooking.
Doing so can result in food poisoning or sickness. Foods
that can easily spoil such as milk, eggs, fish, meat or
poultry, should be chilled in the refrigerator first. Even
when chilled, they should not stand in the oven for more
than 1 hour before cooking begins, and should be removed
promptly when finished cooking.
To set Warm & Hold for hot cooked foods:
1. If needed, arrange interior oven racks and place hot
cooked food in oven.
2. Press Bake key pad. — — —° ° ° ° ° appears in display.
3. Within 5 seconds, press and hold
appears in display (release keypad at 77°C if
temperature display mode is set for Celsius).
4. Press key pad once. HLd will appear in display
indicating the oven is set for Warm & Hold. Warm &
Hold will automatically turn off in 3 hours.
To cancel Warm & Hold at anytime press
Important notes:
• Warm & Hold will maintain the oven temperature at
170° F (77°C) and will turn the oven off automatically
after 3 hours.
• Set Warm & Hold function for the oven when finished
cooking. If Warm & Hold is set while cooking, any
previously set oven temperature will change to the Warm
& Hold default temperature of 170°F (77°C). In most
cases the oven temperature will be much lower.

Adjusting oven temperature

Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is cooking
too hot or too cool for your recipe times, you may adjust
the control so the oven cooks hotter or cooler than the oven
temperature displayed.
The oven temperature may be increased as much as +35°F
(+19°C) or decreased -35°F (-19°C) from the factory
calibrated settings.
To adjust oven temperature:
1. Press Bake key pad.
2. Set the oven temperature to 550°F (287°C) by pressing
and holding the
appears in display (287°C if control is set for Celsius
display mode).
3. Within 2 seconds, press and hold Bake key pad until
numeric digit(s) appear. Release Bake keypad. The
display now indicates the amount of degrees offset from
until 170°F
the original factory temperature setting and the current
temperature setting. If the control still has the original
factory calibration, the display will read 0.
4. The temperature may be adjusted up or down 35°F
(19°C), in 5°F increments by pressing and holding the
of temperature offset appears in the display and release
.
key pad.
5. Press
Important notes:
• Oven temperature adjustments made will not change the
Broil or Select Clean operating temperatures.
• DO NOT USE oven thermometers such as those found in
grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much
as 20 to 40°F degrees from actual temperatures.
• The oven temperature adjustment may be made if your
oven control has been set to display °C (Celsius)
temperatures. Minimum and maximum settings for
Celsius is plus (+) or minus (-) 19°C.
• If the display mode is set for Celsius, adjustments made
will be in 1°C increments each press of the
key pads.
20
key pad. Release when 550°F
or key pads. Adjust until the desired amount
to accept and return to normal operation.
or