Lenovo ThinkCentre 7258 User Manual page 30

Installing a drive in bay 1 or bay 2
This section provides instructions on how to install a drive in bay 1 or bay 2.
To install a drive in bay 1 or bay 2:
1. Remove the computer cover. See "Removing the computer cover" on page 14.
2. Remove the front bezel. See "Removing and installing the front bezel" on page
Figure 13. Locating the spare retainer
3. Pull the metal static shield outward to remove it from the drive bay.
4. If you are installing a drive with accessible media, such as an optical drive,
5. Remove the retainer from the upper drive cage by sliding it downward.
22
User Guide
16.
Note: Notice the spare retainer 1 attached to the side of the upper drive
cage.
remove the plastic panel in the bezel for bay 1 or bay 2 by squeezing the plastic
tabs that secure the panel on the inside of the bezel.