Changing The Fm Tuning Step; Switching The Auto Pi Seek - Pioneer KEH-P6600R Operation Manual

Initial Setting

Changing the FM Tuning Step

Normally set at 50 kHz during Seek tuning in the FM mode, the tuning
step changes to 100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
1. Select the FM tuning step mode (FM STEP) in the Initial
Setting Menu.
2. Select the desired tuning step.
5
2 3
F
∞
A
23
To cancel the Initial Setting Menu, press the BAND button.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.

Switching the Auto PI Seek

During Preset Station PI Seek operation, you can switch the Auto PI Seek
function ON/OFF. (Refer to "PI Seek Function" on page 17.)
1. Select the Auto PI Seek mode (A-PI) in the Initial Setting
Menu.
2. Switch the Auto PI Seek ON or OFF.
5
2 3
F
∞
A
23
To cancel the Initial Setting Menu, press the BAND button.
57
F A
PGM
[]
F A
PGM
[]