Using Multi-CD Players
This product can control one or more multi-CD players.
Basic Operation of Multi-CD Players
1. Select the multi-CD player source.
1
SOURCE
Each press
changes the Source ...
Note:
• The multi-CD player may perform a preparatory operation, such as verifying the
presence of a disc or reading disc information, when the power is turned ON or a
new disc is selected for playback. "READY" is displayed.
• If the multi-CD player cannot operate properly, an error message such as
"ERROR-14" is displayed. Refer to the multi-CD player owner's manual.
• If there are no discs in the multi-CD player magazine, "NO DISC" is displayed.
2. Select the desired disc.
5
2
3
F
∞
A
23
3. Select the desired track (or fast-forward/reverse, per the chart
below).
5
2
3
F
∞
A
23
This product lets you select the track search function or fast-
forward/reverse function by changing the length of the time you press the
button.
Track search
Fast-forward/Reverse
PGM
[]
2
2
ATT
F
A
PGM
[]
F
A
[]
PGM
0.5 seconds or less
Continue pressing
30