Table of Contents
Advertisement
Quick Links
Installation Instructions
30" Freestanding
Sealed Burner
A child or adult can tip the range and be
killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range
is moved.
Failure to follow these instructions can
result in death or serious burns to children
and adults.
Gas
Range
with self-cleaning oven
WARNING
Tip Over Hazard
Quick Reference
Table of Contents:
Pages
2
Before you start
Product dimensions
2
Cabinet dimensions/requirements
2
Electrical requirements
3
Gas supply requirements
3
Installation steps
4 - 6
Gas conversions
7 - 8
Back cover
If range does not operate
Back cover
If you need assistance/service
Back cover
Moving the range
If you need assistance:
Check your Use and Care Guide for a toll-free number to call or call
the dealer from whom you purchased this range. The dealer is listed
in the Yellow Pages of your phone directory under "Appliances —
Household — Major — Service and Repair."
Call when you:
Have questions about range installation or operation.
Need to obtain the name and number of an authorized
service company.
When you call, you will need:
The range model number.
The range serial number.
Both numbers are listed on the model/serial rating plate located on
the frame behind the storage drawer.
IMPORTANT:
Read and save these instructions.
IMPORTANT:
Installer: Leave Installation Instructions with the homeowner.
Homeowner: Keep Installation Instructions for future reference.
Save Installation Instructions for local electrical inspector's use.
Part No. 8523780
Advertisement
Table of Contents
Related Manuals for Whirlpool 30" Freestanding Sealed Burner Gas Range with self-cleaning oven
Summary of Contents for Whirlpool 30" Freestanding Sealed Burner Gas Range with self-cleaning oven
- Page 1 Installation Instructions Quick Reference 30" Freestanding Table of Contents: Sealed Burner Pages Before you start Range Product dimensions Cabinet dimensions/requirements with self-cleaning oven Electrical requirements Gas supply requirements Installation steps 4 - 6 Gas conversions 7 - 8 Back cover If range does not operate Back cover If you need assistance/service...
-
Page 2: Product Dimensions
Before you start... Product dimensions Grounded electrical Your safety and the safety of others is outlet is required. See very important. “Electrical requirements,” We have provided many important safety Page 3. messages in this manual and on your appliance. Proper gas supply Always read and obey all safety messages. -
Page 3: Tools Needed
Tools needed Electrical requirements Electronic ignition systems operate within wide WARNING level voltage limits, but proper grounding and polarity are necessary. In addition to checking that the outlet is correctly grounded, the outlet must be 3/8" drive checked by a qualified electrician to see if it is ratchet wired with correct polarity. -
Page 4: Installation Steps
Electronic clock/timer optional on Check cooktop some models burners for proper flame Plug power supply cord into grounded outlet Make proper Remove shipping gas connection material. Remove oven racks and parts package. Install anti- tip bracket Secure range with anti-tip Level range bracket Close storage drawer. -
Page 5: Operating Position
Before moving range across floor, check that Operating position range is still on cardboard shipping base to protect floor covering. front leveling leg Making sure the anti-tip bracket is installed: anti-tip • Look for the bracket anti-tip bracket Place rack in oven. Place level on rack, securely attached to range foot first side to side;... -
Page 6: Electronic Ignition System
Check operation Check operation of oven broil Follow the instructions for your type burner Electronic ignition system of oven controls. Cooktop and oven burners use electronic Note: A faint ticking sound will be heard while ignitors in place of standing pilots. When a Follow the instructions for your type the burner lights. -
Page 7: Gas Conversions
Gas conversions Gas conversions (from Natural gas to L.P. gas; or reinstall from L.P. gas to Natural gas) must be done by a Surface one of the qualified installer. orifice Burners: screws spud Remove burner spark electrode caps. Use a WARNING orifice Phillips or... -
Page 8: Natural Gas Conversion
Natural gas conversion reinstall Surface one of the orifice Burners: screws spud Remove burner spark electrode Check that main gas supply line has been caps. Use a orifice shut off and the power supply cord is Phillips or spud disconnected. holder Quadrex screwdriver to... -
Page 9: Moving The Range
When you call, you will need: The range model number. The range serial number. Both numbers are listed on the model/serial rating plate located on the frame behind the broiler drawer. Part No. 8523780 Benton Harbor, Michigan 49022 Printed in U.S.A. © 2002 Whirlpool Corporation...